AeroVironment Quantix, Руководство пользователя

Страница: 13 / 17

18
Quantix™ © AeroVironment 2017–2019 Quantix™ © AeroVironment 2017–2019
19
Replacing Your SD Card
If it becomes necessary to replace the SD
memory card, the replacement card must have
• SD Extended Capacity (SDXC)
• 64 GB or greater
• Speed class rating of U-3 or greater
• UHS bus speed mode single data rate
104 (SDR 104)
Updating Aircraft and Tablet Software
Formatting Your SD Card
SD card performance normally degrades over time, and your SD card may eventually
It is also recommend to use the same model SD card that was provided with your
system.
Binding to a New Aircraft
desired plane from the list.
Your Quantix comes with a 128GB PNY SD Card (Model No. P-SDX128U395-GE)
Aircraft Fault Responses
The Quantix aircraft is designed to respond automatically to faults and anomalies.
Fault Aircraft Response
Preflight errors Aircraft will not launch.
Loss of Link After 60 seconds of not communicating
with the tablet, the aircraft will cancel the
path altitude.
Low Battery
battery power to complete the mission, it
will cancel the mission, return home and
Depleted Battery
battery power to return home, it will land
Loss of GPS The aircraft will land immediately.
Temperature Warnings If the aircraft determines that the avionics
temperature exceeds temperature limits,
the aircraft will cancel the mission, return
home and land.
Navigation Error The aircraft will land immediately.
Violating Keep-in-Zone The aircraft will land immediately.
Onboard Storage Becomes Full The aircraft will cancel the mission, return
home and land.
The Quantix application will notify you should any of these
faults occur.
Locating Aircraft After an Unplanned Landing
If your Quantix aircraft has an unplanned landing, do not close the Quantix application,
and use the map icons to reach the aircraft. Once you have reached the aircraft, follow
these steps:
1. Use the emergency stop command if the props are still rotating.
2. Power down the aircraft.
3. Inspect the aircraft and props for damage.
4. Remove the SD card.
Troubleshooting