Aerotech XC2e Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 92

Aerotech XC2e Скачать руководство пользователя страница 2

GLOBAL TECHNICAL SUPPORT

Go to

https://support.aerotech.com/servicedesk/customer/portal/1

for information

and support about your Aerotech, Inc. products. The website supplies software,
product manuals, Help files, training schedules, and PC-to-PC remote technical support.
If necessary, you can complete Product Return (RMA) forms and get information about
repairs and spare or replacement parts. To get help immediately, contact a service office
or your sales representative. Include your customer order number in your email or have
it available before you call.

This manual contains proprietary information and may not be reproduced, disclosed, or
used in whole or in part without the express written permission of Aerotech, Inc.
Product names mentioned herein are used for identification purposes only and may be
trademarks of their respective companies.

Copyright © 2019-2020, Aerotech, Inc., All rights reserved.

«
1
2
3
4
...
»

Содержание XC2e





























































































Отзывы:

Нет отзывов