Aerotech PRO280LM Series, Руководство по оборудованию, Страница: 7 / 52

PRO280LM Hardware Manual Safety
Safety Procedures and Warnings
This manual tells you how to carefully and correctly use and operate the PRO280LM. Read all parts of this
manual before you install or operate the PRO280LM or before you do maintenance to your system. To
prevent injury to you and damage to the equipment, obey the precautions in this manual. The precautions
that follow apply when you see a Danger or Warning symbol in this manual. If you do not obey these
precautions, injury to you or damage to the equipment can occur. If you do not understand the information in
this manual, contact Aerotech Global Technical Support.
This product has been designed for light industrial manufacturing or laboratory environments. The protection
provided by the equipment could be impaired if the product is used in a manner not specified by the
manufacturer.
N O T E : Aerotech continually improves its product offerings; listed options may be superseded at any
time. All drawings and illustrations are for reference only and were complete and accurate as of this
manual’s release. Refer to www.aerotech.com for the most up-to-date information.
D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.
1. Access to the PRO280LM and component parts must be restricted while connected to a
power source.
2.
Do not connect or disconnect any electrical components or connecting cables while
connected to a power source.
3. Disconnect electrical power before servicing equipment.
4. All components must be properly grounded in accordance with local electrical safety
requirements.
5.
Operator safeguarding requirements must be addressed during final integration of the
product.
W A R N I N G : To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.
1. Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts
must be restricted while connected to a power source.
2. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid
potential hazards.
3.
Do not expose this product to environments or conditions outside of the listed
specifications. Exceeding environmental or operating specifications can cause damage to
the equipment.
4. The PRO280LM stage must be mounted securely. Improper mounting can result in injury
and damage to the equipment.
5.
Use care when moving the PRO280LM stage. Lifting or transporting the PRO280LM stage
improperly can result in injury or damage to the PRO280LM.
6. The stage forcer temperature may exceed 75°C.
7. Operators must be trained before operating this equipment.
8. All service and maintenance must be performed by qualified personnel.
www.aerotech.com 7