Aerotech Nmark SSaM Скачать руководство пользователя страница 9 | Manualshive

Страница: 9 / 58

background image

Electrical Safety

Nmark SSaM Hardware Manual

Safety Procedures and Warnings

This manual tells you how to carefully and correctly use and operate the Nmark SSaM.

l

Read all parts of this manual before you install or operate the Nmark SSaM or before you

do maintenance to your system.

l

To prevent injury to you and damage to the equipment, obey the precautions in this

manual.

l

Aerotech continually improves its product offerings; listed options may be superseded at

any time. All drawings and illustrations are for reference only and were complete and
accurate as of this manual’s release. Refer to www.aerotech.com for the most up-to-date
information.

If you do not understand the information in this manual, contact Aerotech Global Technical
Support.

This product has been designed for light industrial manufacturing or laboratory environments. The protection
provided by the equipment could be impaired if the product is used in a manner not specified by the
manufacturer.

D A N G E R : This product contains potentially lethal voltages. To reduce the possibility of
electrical shock, bodily injury, or death the following precautions must be followed.

1. Disconnect electrical power before servicing equipment.
2. Disconnect electrical power before performing any wiring.
3. Access to the Nmark SSaM and component parts must be restricted while connected to a

power source.

4. To minimize the possibility of electrical shock and bodily injury, extreme care must be

exercised when any electrical circuits are in use. Suitable precautions and protection must
be provided to warn and prevent persons from making contact with live circuits.

5. Install the Nmark SSaM inside a rack or enclosure.
6.

Refer to local electrical safety requirements to correctly size external system wires.

7. Do not connect or disconnect any electrical components or connecting cables while

connected to a power source.

8. All components must be properly grounded in accordance with local electrical safety

requirements.

9. Operator safeguarding requirements must be addressed during final integration of the

product.

W A R N I N G : To minimize the possibility of electrical shock, bodily injury or death the
following precautions must be followed.

1. If the product is used in a manner not specified by the manufacturer, the protection

provided by the product can be impaired and result in damage, shock, injury, or death.

2. Moving parts can cause crushing or shearing injuries. Access to all stage and motor parts

must be restricted while connected to a power source.

3. Cables can pose a tripping hazard. Securely mount and position all system cables to avoid

potential hazards.

4. Do not expose this product to environments or conditions outside of the listed

specifications. Exceeding environmental or operating specifications can cause damage to
the equipment.

5. Operators must be trained before operating this equipment.
6. All service and maintenance must be performed by qualified personnel.

www.aerotech.com

9

«
...
7
8
9
10
11
...
»

Содержание Nmark SSaM



























































Отзывы:

Нет отзывов

Похожие инструкции для Nmark SSaM

ImageFormula DR-7080C

Бренд: Canon Страницы: 4

Бренд: Keithley Страницы: 80

Бренд: Manfrotto Страницы: 2

Бренд: Calsense Страницы: 6

Бренд: Uniden Страницы: 16

Бренд: Uniden Страницы: 20

Бренд: Yakima Страницы: 8

Бренд: Olympus Страницы: 172

Бренд: 3SIXT Страницы: 12

Бренд: Farad Страницы: 8

Sterling ALL-TERRAIN 576

Бренд: Roadmaster Страницы: 12

Big Daddy Insta-Net

Бренд: Izzo Golf Страницы: 2

Бренд: Pro-Ject Audio Systems Страницы: 7

Бренд: SOLAC Страницы: 13

ecoCRAFT VKK GB 1206/3-E-H

Бренд: Vaillant Страницы: 16

Бренд: Toro Страницы: 8

Бренд: Hama Страницы: 112

Intercooler Kit Type 31

Бренд: GReddy Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды