AEROTECH HERMAN NELSON INTERNATIONAL INC.
100 Eagle Drive, Winnipeg, Manitoba Canada R2R 1V5
Phone: 204-633-1999 (24 Hours) Fax: 204-694-1612 Email:
Check Out Our Web site
www.hermannelson.com
New Items Added Weekly
12.18.07 REVISION 1.02
Section 5
• • • • • • • • • • • • • • • •
5.60 Fuel Pump Removal
5.61
To
remove the fuel pump, proceed as follows:
(a) Remove the v-belt by slipping it off the fuel pump pulley
(see figure 5-1).
(b) Remove the fuel lines on the pump.
(c) Remove the pulley by loosening the set screw.
(d) Remove the mounting two bolts from the fuel pump and remove the pump.
5.62 Fuel Pump Installation
5.63
To
install
the fuel pump, reverse the removal procedures.
NOTE
Check belt tension after installing the fuel pump.
Adjust following procedures listed in paragraph 5.22.
5.64 Fuel Pump Strainer
5.65 Cleaning
5.66
To
clean the fuel pump strainer, proceed as follows:
(a) Remove the fuel pump from its mounting bracket. Follow procedures listed in
paragraph 5.60.
(b) Unscrew and remove the eight screws attaching cover to pump body. Remove
cover and gasket from pump body.
(c) Remove strainer from body. Wash strainer using an approved cleaning solvent.
Allow strainer to air dry.
(d) Clean out any dirt remaining in body.
NOTE
If there is evidence of rust inside pump body,
check fuel filter and fuel tank for water contamination.
36
