manualshive.com logo in svg

Aerotech Aerospeed 2.2 ST 5220, Руководство пользователя, Страница: 32 / 50

Поделиться
Скачать
Aerotech Aerospeed 2.2 ST 5220 Скачать руководство пользователя страница 32

32

ST 5220

QM 1336.rev.01

Interaction Between the Temperature Curve and the Mini-
mum Speed Curve

•

The minimum speed curve can be activated only if the tempera-
ture curve is already activated

•

All points of the minimum speed curve other than the first one are
automatically given day numbers identical to those specified for the
temperature curve. Only the first point of the minimum speed curve
has an adjustable day number. This day number must be greater or
equal to the day number specified for the first point of the tempera-
ture curve and less than the day number specified for the second
point of the temperature curve (see example 1).

TEMPERATURE CURVE

POINT

 1

POINT

 2

MINIMUM SPEED CURVE

d5

d20

d5 to d19 (adjustable)

d20  (not adjustable)

EXAMPLE 1

Table 1.

''Heater A Starting Temperature - 5.0°F (2.8°C)'

OR

''Set Point'', if the parameter settings are such that the
preceding value is greater than the set point.

 STAGE 4

OPERATION

THRESHOLD VALUE

Cooling

''Set Point - 5.0°F (2.8°C)''

Heating

Содержание Aerospeed 2.2 ST 5220



















































Отзывы:

Нет отзывов