Aeros Discus 12, Руководство пользователя

Страница: 8 / 63

7
13. The next step is to deploy the outboard sprogs and secure them in position). Before doing so, working through the
sprog access zippers, preflight the following items:
a. Internal ribs to confirm that they are fully zipped up.
b. The sprog hardware, and the sprog cable attachments at both ends of each sprog cable.
To deploy and secure each sprog, swing the sprog away from the leading edge and align it in the center of the rear end of
the sprog access zipper. Fully close the sprog access zipper and this will secure the sprog in the proper position underneath
the transverse batten and capture it in position (
Photo 15)
.
Photo 15 Photo 16
14. Attach the bottom front wires to the hook on the bottom nose plate (
Photo 16
).
15. By lifting up and back on the nose batten strings, push the nose battens fully back into the sail so that the tips rest on
top of the keel tube (
Photo 17
).
Photo 17 Photo 18
16. Install the bottom surface battens (
Photo 18
).
17. Zip up the center sail zipper.
18. Install the nosecone, which is connected to the front upper wire.
Don’t fly without the nosecone!