Aeros Discus 12, Руководство пользователя

Страница: 14 / 63

13
11. At the wingtips, lay the sail at the tip out flat, and fold the wingtip forward over onto the bottom surface of the sail (
Photo
26
) .
Photo 26 Photo 27
Working from the trailing edge, roll the sail tightly to the leading edge (
Photo 27
), and install the tip cover bag.
Note : If you're breaking down in a dirty, rocky and/or abrasive area, you can combine this step with step 7 above, by
pivoting the wing inwards enough to allow you to flip the sail at the tip over the top of the leading edge, fold forward
and roll up the wing tip and put it in the tip cover bag.
12. Finish rolling the sail in the area of the sprogs. Secure the sail with the velcro sail ties. The first velcro tie is installed by
passing it over the top of the keel tube just near the Crossbar-LE tube junctions, and then installing it around the glider
leading edges (
Photo 28
).
Photo 28 Photo 29
13. Install the sail velcro around the sail forward of the control bar
apex, and stow the nosecone between the leading edges (
Photo 29
,
30
).
Photo
3
0