Aeros COMBAT 12T, Руководство по эксплуатации для владельца

Страница: 7 / 31

7
5. Carefully fold the outermost area of the sail over onto the innermost area of the sail, place Velcro ties
around the wing and put on the wing bag, turning the bag 180 deg (i.e. matching the front part of the bag
to the rear part of the wing).
6. Zip up the wing bag zipper.
Combat 12T SET-UP PROCEDURE
1. Lay the wing on the ground, with the bag zipper up and the nose of the wing pointing into the wind.
2. Undo zipper and take out the battens and the control bar.
3. Lift and separate the control frame uprights.
Remove the quick pin from the corner bracket. Insert the corner bracket all the way into the control bar.
Install the quick pin bolt (from front to rear), securing the bracket to the control bar.
.
CAUTION
DO NOT FORCE THE FITTING INTO THE CONTROL BAR IF IT DOES NOT SLIDE IN FREELY AND
CHECK FOR DIRT OR DAMAGE TO THE FITTING OR THE INSIDE OF THE CONTROL BAR.
4. Flip the wing upright on the control bar. Try to set the control bar on level ground. Remove the wing
bag and all the Velcro sail ties. Do not remove the leading edge tip protection bags at this time.
5. By lifting up the nose battens, push the nose battens fully back into the sail so that the batten tips rest
in the corresponding holes in the keel tube.
6. Take the keel tube stinger out and protect the keel tube end with the cover.