6
Component Identification
INSTALLATION:
Grounding and Electric Requirements
Grounding Instructions
This product must be grounded.
In the event of an eletrical short circuit, grounding reduces the risk of electric
shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire
with an appropriate grounding plug . The plug must be plugged into an outlet that is properly installed and grounded in
accordance with all local codes and orinances.
Improper installation of the grounding plug can result in a risk of electric shock.
If repair or replacement of the cord or plug is necessary, do not connect the green grounding wire to either flat blade
terminal. The wire with insulation having a green outer surface with or without yellow stripes is the grounding wire and
must be connected to the grounding pin. Check with a qualified electrician or serviceman if the grounding instructions
are not completely understood, or if you are in doubt as to whether the product is properly grounded. Do not modify the
plug provided. If the plug will not fit the outlet, have the proper outlet installed by a qualified electrican.
Number Description
Function Introduction
01
Pressure Adjust Knob Control output pressure of Paint(Clockwise increase
pressure, anticlockwise decrease pressure)
02
Electrical Switch
Control the sprayer on or off
03
Pressure Relief Valve Horizontal direction means the paint operating
condition,
Vertical direction means paint pressure relief condition
04
Fluid Outlet
Paint Output Tube
05
Suction Tube
Absorb the paint from the container to sprayer
06
Drain Hose
When pressure relief, the paint flow from this tube
1
4
3
5
6
2
