13
•
In neutral position the trailing edge of the ailerons must be on the same
level as flap’s trailing edge or ~5mm higher
3.11. Check side wires attachment.
•
The side wires must be connected to the downtubes and should be
impossible to remove the quick pin without pushing the button
•
The side wire must have slack if the RVG off and must have no slack if
the RVG on
3.12. Check control system.
Take the glider as before take off, move control frame right and left.
•
The control frame must move easily, ailerons and SPADD must move
properly.
