STEP 4. Tail Control Test
6
These are the trims used to adjust the “neutral” point of
your control stick. Confirm they are both centered when
performing this test.
These switches that set the direction of each servo.
Confirm they are in the position shown. The left switch
should be DOWN, the right switch UP.
¤ Switch on transmitter - green LED lights
¤ Install battery beneath canopy as shown - push forward
into nose while seating fully on the floor.
¤ Move the stick side to side and the rudder should move
as shown on the following page and return exactly level
with the tail surface.
¤ Move the stick up to down and the elevator should move
as shown on the following page and return exactly level
with the tail surface.
¤ If movements are not as shown, or don’t return level with
the tail surfaces, check the following:
