STEP 3. Transmitter Set Up
¤ Tie the included red flag to the end of your antenna.
¤ Remove transmitter back cover by pressing down on
the area marked “PUSH”.
¤ Install 8 new Alkaline AA size batteries. (Not
included) NiCd or NiMH batteries may also be used.*
¤ Check the polarity before replacing the cover.
¤ To test, switch on the transmitter. The Green LED
should glow brightly.
¤ Replace batteries when the red LED glows brighter
than the green LED.
IMPORTANT: Never attempt to charge Alkaline batteries.
¤ If you will be using NiCd or NiMH batteries, the charging jack
on the side of the transmitter accepts chargers compatible
with HiTec or Airtronics radios. (Not included)
5