Aerohive BR200-WP, Справочник по аппаратуре

Страница: 52 / 124

Chapter 5 The AP340 Platform
50 Aerohive
P
RODUCT
O
VERVIEW
The AP340 is a multi-channel wireless access point. It is compatible with IEEE 802.11b/g/n (2.4 GHz) and IEEE
802.11a/n (5 GHz) standards and supports a variety of Wi-Fi security protocols, including WPA (Wi-Fi
Protected Access) and WPA2.
You can see the hardware components on the AP in
Figure 1 . Each component is described in Table 1
"AP340 component descriptions" .
Figure 1 AP340 hardware components
Table 1 AP340 component descriptions
Component Description
Status LEDs The status LEDs convey operational states for system power, firmware, Ethernet
interfaces, and radios. See "Status LEDs" on page 52 .
Device lock slot You can physically secure the AP by attaching a lock and cable (such as a
Kensington
®
notebook lock) to the device lock slot or by using the lock adapter that
is included in the mounting kit and a padlock. See "Locking the AP340" on page 56 .
802.11a/b/g/n
RP-SMA connectors
You can connect up to six detachable single-band antennas to the male
802.11a/b/g/n RP-SMA (reverse polarity-subminiature version A) connectors.
Connect the longer antennas, which support 2.4 GHz frequencies (for IEEE
802.11b/g/n), to the connectors on the side panel with the Ethernet ports. Connect
the shorter antennas, which support 5 GHz frequencies (for IEEE 802.11a/n), to the
connectors on the side panel with the device lock slot. See "Antennas" on page 53 .
10/100/1000 Mbps
PoE ports
The two 10/100/1000-Mbps Ethernet ports—ETH0 and ETH1—support IEEE 802.3af and
802.3at PoE (Power over Ethernet) and receive RJ45 connectors. See "Ethernet Ports"
on page 51 .
5 GHz (A) 5 GHz (B) 5 GHz (C)
2.4 GHz (A) 2.4 GHz (B) 2.4 GHz (C) ETH0 ETH1 48V DC
(.625A)
CONSOLE RESET
Status LEDs
Device lock slot
802.11a/n RP-SMA connectors for detachable single-band
802.11b/g/n RP-SMA connectors for detachable single-band