All Ethernet and RS232 (console) ports and the cables attached to them are
designed for intra-building connection to other equipment. Do not connect
these ports directly to wiring that exits the building where this appliance is
located
Installing the AP245X
The following sections describe how to install your Aerohive AP245X devices, connect them to the
network, and start managing them in HiveManager NG.
Shipping Carton Contents
The AP245X access point shipping carton contains the following items:
• AP245X chassis
• Aerohive Generic QuickStart Guide
• Hardware accessories kit containing:
• 3 wall-mount screws and three wall anchors
• Wall-mount or diagonal ceiling mounting bracket
Antennas are sold separately. (Aerohive SKU AH-ACC-DB-5-ANT-KIT, 6 dual-band 5 dBi articulated
indoor antennas)
Mounting the AP245X
You can mount the AP245X on a flat surface, a wall, or to the tracks of a dropped ceiling grid. The
following sections describe these installation methods.
Wall or Non-dropped Ceiling Mount
Attach the AP245X to any vertical or horizontal surface that will supports its weight (1.6 lb, or 0.73
kg), and to which you can install wall mount screws. Use the following procedure.
1. Use the bracket keyholes as a template to mark the mounting hole locations, and drill two
corresponding holes in the wall or drywall ceiling.
Page 7 of 17
AP245X Hardware User Guide
6/14/2016
