LIMITED WARRANTY
Due to continuing improvements, actual
product may differ slightly from the product
described herein. Some states do not allow
the exclusion or limitation of incidental or
consequential damages, so the above
limitation or exclusion may not apply to you.
This warranty gives you specific legal rights,
and you may have other legal rights that
vary from state to state. If you have any
questions please feel free to contact our
customer service representatives at
AeroGrow International, Inc., P.O. Box
18450, Boulder, CO 80308
What Is Covered
This warranty covers any defects in
materials or workmanship, with the
exceptions stated below.
How Long Coverage Lasts
This warranty runs for one (1) year from the
date of original purchase, for the original
purchaser/user.
What is Not Covered
The warranty shall not apply to problems
arising from: normal wear; failure to adhere
to enclosed assembly and installation
instructions; serial-numbered products if the
serial number has been removed or
defaced; products subject to negligence,
accident, improper use, maintenance or
storage; products damaged by
circumstances beyond AeroGrow
International, Inc.’s control; loss or damage
to removable parts; or products modified
(including, but not limited to, modifications
through the use of unauthorized parts or
attachments) or repaired by anyone other
than AeroGrow International, Inc., or its
designee. This warranty excludes all
incidental or consequential damages.
What AeroGrow Will Do
AeroGrow International, Inc., at its option,
will repair any defects in materials or
workmanship or will replace this product with
one of similar features and price. AeroGrow
International, Inc.’s sole obligation and your
exclusive remedy under this warranty shall
be limited to such repair or replacement.
To Return This Product
See our website at www.aerogrow.com for
instructions. Do not return products to
AeroGrow International, Inc. without our prior
consent. Unauthorized returns, as well as
C.O.D. shipments, will be refused.
300186AB 5/18/08
If you have any questions
please feel free to contact
Customer Service:
1-800-476-9669
or email:
info
@
aerogrow.com
© 2006 AeroGrow International, Inc.
5
Screw
Top Mounting Bracket
into top set of pilot holes with
provided screws.
Tab
Slot
9
Slide
Bottom Cover Plate
into
place below
AeroGarden Shelf
so that
Tab
connects with
Slot
.
10
Gently push
Bottom Cover
Plate
to secure to
Shelf
Mounting Bracket.
11
Place AeroGarden on shelf.
Run electrical cord behind
Cover Plate
and down through
Mounting Bracket
.
If needed, use a 16 gauge
(or heavier) extension cord to
reach outlet.
6
Screw
AeroGarden Shelf with
Mounting Bracket
into bottom
set of pilot holes.
Push
Top Cover Plate
toward
wall until it connects with
Top Mounting Bracket.
8
pilot
holes
Install Shelf
Cut Out
Shelf
Support
7
Place
Top
Cover Plate
over
Shelf
so
that
Cut Outs
fit over
Shelf Supports
.
Hint: Angle Cover Plate slightly away
from wall.
center
line of
wood
stud
Mark and Drill Pilot Holes
1
Locate and mark center line
on
wood stud
.
Hold
AeroGarden Shelf with
Mounting Bracket
at desired
height and mark locations for
pilot holes.
29”
19”
Unpack Your Wall Farm
Box Contents:
Wall Farm Deluxe Single
Assembly & Installation Instructions
4 Screws
1 AeroGarden Shelf
with Mounting Bracket
Shelf
Supports
1 Top Mounting Bracket
1 Top Cover Plate
Cut Outs
1 Bottom Cover Plate
Tools Needed
You will need the following tools to
assemble and install your Wall Farm:
Tape Measure
Pencil
Drill
•
13/64” Drill Bit
(or smaller, e.g., 5/32”)
Phillips Head
Screwdriver
•
•
•
•
Selecting Wall Farm Location
Place your Wall Farm in a
location with:
29” height to allow space for the full
extension of raised lamp hood.
19” width
Easy access to a standard electrical
outlet (110V, polarized)
Away from:
Direct sources of heat
(e.g., stove, furnace vents)
Direct sources of cold
(e.g., window drafts, A/C vents)
•
•
•
•
•
pilot hole
marks
2
Measure up 10” from top pilot
hole mark and mark wall for
Top Mounting Bracket
.
pilot hole
marks
3
Place base of
Top Mounting
Bracket
at mark made in Step 2
and mark locations for pilot holes.
center
line of
wood
stud
pilot hole
marks
4
Drill four 1- 1/2” deep pilot
holes with 13/64” drill bit.
Wall Farm must
be attached to
and centered on
a wood stud.
Wall Farm must
be attached to
and centered on
a wood stud.
Customer Service
Congratulations...
You have installed
your Wall Farm!
Mounting
Bracket
Wall Farm Deluxe Single
Assembly & Installation Instructions
center
line of
wood
stud
TM
