background image

1

IMPORTANT SAFETY INSTRUCTIONS

(saVe tHese instruCtions)

When using this AeroGarden PRO

200

 electrical furnishing, basic precautions should always be followed, in-

cluding the following:

read all instructions before using this aerogarden furnishing.

1. To reduce the risk of electric shock, the AeroGarden PRO

200

 has a specific plug. Do not change the plug in any way.

DANGER

 

– to reduce risk of electric shock:

2. Always unplug AeroGarden PRO

200

 from electrical outlet before cleaning or changing Grow Bulbs (light bulbs).

WARNING

 

– to reduce risk of burns, fire, electric shock, or injury to persons:

3. Unplug AeroGarden PRO

200

 from outlet before putting on or taking off parts.

4. Close supervision is necessary when AeroGarden PRO

200

 is used by or near children, invalids, or disabled persons.

5. Use AeroGarden PRO

200

 only for its intended use as described in the instructions. Do not use attachments not recommended by 

manufacturer. 

6. Never operate AeroGarden PRO

200

 if it has a damaged cord or plug, if it is not working properly, if it has been dropped and 

damaged, or if it has been dropped in water. If any of these conditions occur/exist, contact www.aerogardensupport.com or 

your country’s local distributor for instructions.

7. Keep cord away from heated surfaces.
8. Never operate furnishing with air openings blocked. Keep air openings free of lint, hair, and the like.
9. Never drop or insert any object into any electrical openings.

10. Do not use outdoors.
11. Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
12. Do not touch moving parts or hot parts such as pumps, bulbs, reflective surfaces, and the like.
13. To disconnect, remove plug from outlet.
14. Do not place or submerse base, cord, plug, or lamp hood in water or other liquid to clean it.
15. Do not allow water to contact hot light bulbs. 
16. Use only approved and supplied parts and accessories. Use only lamp model 100633 (N. America) or 200633 (Europe & Austra-

lia) Grow Bulbs with this AeroGarden model. Use of any other kind of accessory is not recommended. Replacement parts can 

be ordered from www.aerogardensupport.com or from your retailer.

17. Do not use AeroGarden PRO

200

 for other than intended purpose.

18. This product is intended for household and residential use only. This product is not approved for commercial applications.
19. Read and follow all important notices on the AeroGarden PRO

200

 and in the accompanying literature.

20. If supply cord is damaged, it must be replaced by manufacturer, its service agent, or similarly qualified technician in order to 

avoid a hazard.

21. Electrical wiring must be in accordance with local regulations. 
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless they have been given supervision or instruction concerning use of appliance by a 

person responsible for their safety.

23. Children should be supervised to ensure they do not play with the appliance.

SAvE THESE INSTRUCTIONS

Содержание PRO200

















Отзывы: