Personalize Your Light Timer
(optional)
Your PRO
200
has lights and a built-in timer that automatically provide plants with the optimal amount of “sunlight”
(about 16 hours) and “night” (about 8 hours), depending on the plant type you selected in the previous section.
As long as plants get this amount of light, it does not matter when lights are turned off.* Many people find it conve-
nient to have lights go on in the morning and off at night to match their own wake and sleep schedule.
*the exceptions to this are Flower & Vegetable plants. they require a daily dark period in order to produce flowers. if your plants will receive any room
light during the day (natural or artificial), we recommend setting your aerogarden lights to be on during the day.
5 Simple Steps...
In order to make this as simple as possible, you only
need to set the time you want your AeroGarden
lights to go off (Off Time) and your built-in light
timer automatically sets the On Time...nothing
more for you to do.
Decide what time you want the lights to go
OFF
.
AT THAT TIME
check that lights are on. If they are off, quickly press “Lights” button and im-
mediately release. (Lights must be on in order to reset timer.)
With lights on, press and hold “Lights” button until white light next to the plant type you
selected starts blinking – about 5 seconds.
Release the button.
When blinking stops (about 9 seconds), the lights will go off and your lights are now set to
go off at this time every day.
You can reset your timer as often as you want.
1
2
3
4
5
Lights Button
Blinking Light
(if you selected Salad Greens)
9
do the following to set the time you want your lights to go off:
in case of power failure, your Pro
200
has a backup system that stores light, nutrient & replace grow bulbs
timers as well as plant selection settings. When power is restored, your aerogarden will go back to the off-on
cycle you have set.
