10
MLE200
ASSEMBLY INSTRUCTIONS
Above shows STEP 6
assembled and completed
The tread side should be outward
M10X25L ROUND BOLT X2
M10 SPRING WASHER X2
M10 SPRING WASHER X2
M10X25L ROUND BOLT X2
D12
AP
AH
N
BB2
CC4
CC4
DD10
AA3
D4
Adjust Belt Procedure:
1. Lift the selector rod a little and then
insert the pin between first weight stack
and top plate (Do not insert though the
first hole of the rod), and there are
10 mm gap between top plate and first
weight stack.
2. Adjust the belt to have proper tension and
then tighten the belt clamps
3. Remove the pin and let the top plate fall
on the first weight plate.
MLE200-042010
Page
12
