─
13
─
Assembly
Step 3
Note:
Hand tighten bolts and Nylon Lock nuts until machine is fully assembled.
1.Attach four 4.5" Pulley (#48) to the Weight Stack Frame(#1)using:
three M10*50 HHB(#69) one M10*95 HHB(#65)
eight
Φ11*Φ23*2
Flat Washer (#82) four M10 Nylon lock Nut(#78)
2.Attach three 4.5" Pulley (#48) to the Main Frame(#2)using:
one M10*85 HHB (#66) two M10*110 HHB (#63)
six
Φ11*Φ23*2
Flat Washer (#82) three M10 Nylon lock Nut (#78)
3.Attach one 4.5" Pulley (#48) to the Adjustable Cam (#9) using:
one M10*50 HHB (#69) two
Φ11*Φ23*2
Flat Washer (#82)
one M10 Nylon lock Nut (#78)
4.Attach the Cable (#38) to the Main Frame(#2)using :
one M10*45 HHB (#70) two
Φ11*Φ23*2
Flat Washer (#82)
one M10 Nylon lock Nut (#78) one
Φ10*Φ14*2
Bushing (#54)
Make sure that the cable is in the grooves of all pulleies.
