2 1
D E V I C E S E T U P
www.aerocomm.com
E T H E R N E T B R I D G E C O N F I G U R A T I O N
E n a b l i n g E t h e r n e t B r i d g e f u n c t i o n
1
Install the Multitech Auto Discovery Manager software. Available online
http://aerocomm.com/software/Auto_Discovery_Mgr.zip
2
Connect your device to the network via a switch, router, hub, etc. so that it can be assigned a
DHCP IP address.
3
Open the Auto Discovery Manager & wait for your device to be discovered.
4
Write down the value of the DHCP IP Address.
5
Double-click on the discovered device to bring up the Edit Attributes dialog.
E N G I N E E R ’ S T I P
When Bridging is enabled
• You will not be able to configure the radio module once bridging is enabled.
• You will not be able to access the web interface to configure the Ethernet device.
• The only way to connect to the device to configure is via Telnet port 23.
• DHCP must be disabled. The device must be assigned a static IP address. Check with your
IT department before proceeding.
