Glue outer wing panels to centre wing panel
and secure with clamps or tape.
After a careful sanding the wing is ready to
cover.
11
Glue the 6 formers together as shown and make sure the
apertures and outer contours match perfectly.
12
Cut 5×5 mm balsa stripwood 13 to a length of
210 mm and build up a box structure using the
two central fuselage formers, wing supports 11
and balsa stripwood 13.
Attention:
Stripwood ends exactly at the
contact surface of formers 3 and 4 (see graphics
overleaf)!
13
2
2
3
4
5
6
11
13
