![Aero-East-Europe SILA 450 C Скачать руководство пользователя страница 53](http://html1.mh-extra.com/html/aero-east-europe/sila-450-c/sila-450-c_pilot-operating-handbook_2862188053.webp)
OPERATION MANUAL
SILA 450 c
AERO EAST EUROPE
Date 01.09.2015.
Revision 00
Page | 53
AIRPLANE & SYSTEMS DESCRIPTION
AVIONICS POWER SWITCH
The master switch activates the master relay in order to connect battery to circuits. When
master switch is ON it is possible to select the single services switches on supplying power to
the avionics.
Any way it is better to turn on the single avionics devices after that the engine starts except
for the radio COM.
VOLTMETER
A voltmeter installed on the instr. panel shows if the electric system is working properly
according to the following:
Volt indication under 12,5 indicate a problem or a overloading of the system.
Volt indication up to 14.5 indicate a normal behavior.
Volts indications over 14.5 indicate a problem at the rectifier-regulator.
ALTERNATOR CONTROL UNIT AND
LOW – VOLTAGE WARNING LIGHT
The integrated generator produces approx. 250W AC output at 5800RPM and for DC output
is in connection with rectifier-regulator type electronic full wave. Effective voltage is 14 +-
0.3V (from 1000+-250RPM). The current limit is 22A and the max. Permissible component
temperature is +80 °C.
A low voltage warning light is present on the instr. Panel.
CIRCUIT BREAKERS AND FUSES
All of the electrical circuits in the airplane are protected by “push to reset “ type circuit
breakers mounted on the bottom side of panel. The circuit breakers have the correspondent
lighted toggle switch (ON when red light ON) in order to provide power to every device.
THE AIRCRAFT STANDARD CONFIGURATION AND THE COMPLETE LIST OF THE AVIONICS
EQUIPMENT IS REPORTED IN THE “ENCLOSURE 2” ANNEXED TO THE PURCHASE CONTRACT
mod. AEE-Ug001-Engl OF THE AIRCRAFT AND RELEASED ACCORDINGLY.
The Standard configuration comprises the totality airplane’s structure, equipment,
instruments and finishes which enable it to operate properly. When installed optional
devices as for ENCLOSURE 2 the use of the devices must be in accordance with the device’s
operation manual released and supplied by the producer of the avionics/devices.