OPERATION MANUAL
SILA 450 c
AERO EAST EUROPE
Date 01.09.2015.
Revision 00
Page | 25
NORMAL PROCEDURES
3.
LEFT WING
Inspect general condition of upper surface, lower surface, leading and trailing edge,
check rivets and attachment to fuselage and struts, inspect general condition of struts and
attachment to wing and fuselage, inspect general condition ailerons, check freedom of
movement and deflections, inspect attachments to wing, aileron hinges, inspect general
condition flaps, check freedom of movement and deflections, inspect attachments to wing,
flaps hinges, inspect wing root and wing tip and fuel tank cap, be sure that is properly
tightened, to prevent fuel leaking. Visual inspection of pitot tube.
4.
LEFT LEG OF MAIN LANDING GEAR
Inspect brake system, check legs attachments to fuselage and wheels, visual inspect of
tire and check tire pressure (0,6 – 1,0 bar tundra tyres 1,1-1,3 15X6-6.00).
5.
LEFT SIDE OF FUSELAGE
Inspect general condition of surfaces, check attachment with other parts of aircraft,
check rivets visually.
6.
LEFT PART OF HORIZONTAL AND VERTICAL TAIL
Inspect general condition of surfaces, leading and trailing edge, check rivets and
attachment to fuselage. When elevator and rudder acting simultaneously, check there are
no contact between rudder and elevator, check deflections.
7.
RIGHT PART OF HORIZONTAL AND VERTICAL TAIL
Inspect general condition of surfaces, leading and trailing edge, check rivets and
attachment to fuselage. When elevator and rudder acting simultaneously, check there are
no contact between rudder and elevator, check deflections. Inspect the trimmer on elevator
and rudder.
8.
RIGHT SIDE OF FUSELAGE
Inspect general condition of surfaces, check attachment with other parts of aircraft, check
rivets visually
9.
RIGHT WING
Inspect general condition of upper surface, lower surface, leading and trailing edge,
check rivets and attachment to fuselage and struts, inspect general condition of struts and
attachment to wing and fuselage, inspect general condition ailerons, check freedom of
movement and deflections, inspect attachments to wing, aileron hinges, inspect general
condition flaps, check freedom of movement and deflections, inspect attachments to wing,
flaps hinges, inspect wing root and wing tip and fuel tank cap, be sure that is properly
tightened, to prevent fuel leaking.