16
5.6 SET DELIVERY FIN (SWING)
In unit on status, up & down swing function and left & right swing function can be set.
Up & down swing function
:
Up & down swing function has two modes: simple swing mode and fixed-angle swing mode. In unit off status, press “SWING” button and “+” button together for 5 seconds to
switch between simple swing mode and fixed-angle swing mode. Up & down swing icon “ ” will blink during switching.
1.
When simple swing mode is set in unit on status, press “SWING” button to start or stop up & down swing.
2.
When fixed-angle swing mode is set in unit on status, press “SWING” button to adjust swing angle circularly as below:
CLOSED
Left & right swing function
:
In unit on status, press “FUNCTION” button to switch to left & right swing function with left & right swing icon “
” blinking, and then press “ENTER” button to start or cancel
left & right swing. When left & right swing is activated, left & right swing icon “
” will be bright.
5.7 QUIET FUNCTION SETTING
Quiet function
: decrease the noise of indoor unit and achieve the quiet effect. Quiet function has two modes: Quiet mode and Auto Quiet mode. It is available only in Auto,
Cooling, Dry, Fan, Heating,.
Turn on Quiet Function
: press “FUNCTION” button to turn to Quiet function and then Quiet icon “
” or auto quiet icon “
” is blinking. At this moment, press “+” or “-”
button to switch between quiet and auto quiet, and then press “ENTER” button to activate.
Turn off Quiet Function
: press “FUNCTION” button to turn to Quiet function and then press “ENTER” button to cancel Quiet function.
NOTE:
1.
When Quiet function is enabled, indoor unit will operate at quiet fan speed. Fan speed is lowered so as to reduce the noise of indoor fan motor.
2.
When Auto Quiet function is enabled, indoor unit will change fan speed automatically according to room temperature. After room temperature reaches a set point, unit
will operate at quiet fan speed.
5.8 SLEEP SETTING
Night-time comfort function
: in this mode, the unit will operate according to the preset sleep curve to provide comfortable sleep environment.
Activating / Deactivating the Night-Time Comfort Function
: in unit On status, press “FUNCTION” button to switch to Sleep function and the Sleep icon ““
” will blink.
Press “ENTER” button to turn on this function. When Sleep function is activated, ““
” icon is bright and quiet or auto quiet mode is also activated.
Under Auto or Fan the Sleep function is not available.
5.9 ENERGY SAVING FUNCTION SETTING
Energy Saving function
: Air conditioner can be operated in small temperature range by setting the minimum temperature under Cooling and Dry modes and setting maxi-
mum temperature under Heating mode. Thus, energy saving can be realized.
Start up Energy-Saving function for Cooling
: When the unit is off, simultaneously press “TIMER” and “+” buttons for 5s, the buzzer will give out a sound and then unit will
enter into Save setting mode. “
” icon is blinking. Mode icon is on. Press “MODE” button to switch to Cooling or Dry mode. Press “+” or “-” button to adjust the temperature
limit for Save function; press “ENTER” button to start up Save function.
