
29
Aermec cod. INRLLSIY 13_01. 4086991_00
NRL 800 - 1800
GB
User Interface (PGD1)
The unit control panel allow the quick setti ng and
display of the unit’s operati ng parameters. The board
memorises all the default setti ngs and any modifi ca-
ti ons. By installing the remote control panel PGD1 it is
possible to remotely replicate all the functi ons and the
setti ngs available on the unit. Aft er a power failure the
unit is capable of an automati c restart, retaining the
original setti ngs.
The user interface consists of a graphic display with
six navigati on keys; the display is arranged through a
menu hierarchy, acti vated by pressing the navigati on
keys. The default display of these menus is the main
screen. The navigati on between the various parame-
ters is by using the arrow keys located to the right of
the display. These keys are also used for the modifi ca-
ti on of the selected parameter.
Key
Fucntion
ALARM key
Displays the list of active and historical alarms
(red LED on = active alarm)
MENU ACTIVATION key
• Pressing this key activates the navigation between menus
(orange LED on = winter operating mode active)
EXIT MENU key
• Pressing this key returns to the previous menu
NAVIGATION (+) key
• Pressing this key when navigating between menu/parameters passes to the next
menu/parameter
• Pressing this key when modifying a parameter increases the value of the selected parameter
NAVIGATION (enter) key
• Pressing this key when navigating between menus allows entry to the selected menu
• Pressing this key when navigating between parameters allows selection of the parameter
displayed to modify it
• Pressing the key when modifying a parameter confirms the modification of the parameter value
selected
NAVIGATION (-) key
• Pressing this key when navigating between menu/parameters passes to the previous menu/
parameter
• Pressing this key when modifying a parameter decreases the value of the selected parameter
Control Keys
INTERFACE CONTROL KEYS
Control Keys
Start-up procedure
Aft er having powered up the unit the control board will
carry out preliminary operati ons before being ready
for use. This initi al procedure takes around 60 seconds
to complete. During the initi al loading procedure two
screens are displayed: a start-up screen and a screen to
select the system language. These screens are detailed
in the table below.
WARNING: The system language can be set on the
screen displayed at the start-up or can be modifi ed at
any ti me through the appropriate screen contained
in the Installer menu.
Display on the unit
Index
Display/Parameter
C
B
Wait please
6s
A
Installer
ENTER for change
Language:
Time show mask:
English
ESC to confirm
20
A
Remaining time for software loading:
this value shows the remain-
ing time to starting the software loaded on the unit, and passing the
to system language selection
B
System language:
this parameter shows the current language set for
the system. To change the language follow the instructions shown on
the screen.
C
Remaining time to select the language:
this value shows the
remaining time to modify the language. When the time elapses the
display goes to the main screen (Main screen - General monitoring).
WARNING: It is possible to modify the system language at any
time using the appropriate screen contained in the Installer menu.
(Menu password = 0000).
WARNING: It is possible to modify the system language at any time using the appropriate screen contained in the Installer menu. (Menu password = 0000).
14.
START-UP PROCEDURE