23
The TSA parameter values can be:
— TSA = 0 → Outdoor air probe installed inside the recovery unit
— TSA = 1 → External air probe installed outdoors (The probe that must be used for outdoor installation is the KSAE accessory)
5.9 AFTER-SALES ASSISTANCE MENU
The displays that have been introduced in the after-sales assistance menu are addressed to a competent user who knows the hardware structure and the functioning principles
of the recovery unit. The display and iteration of the pages in this section allow you to verify the following recovery unit components during the functional testing or machine
start-up:
— NTC Probes
— Dipswitch settings
— Status of digital inputs
— Forcing of load activation and verification of their functioning
5.9.1 SA Parameter
Page for displaying the value detected by the SA probe at room intake.
5.9.2 SW Parameter
Page for displaying the value detected by the SW probe (accessory) in the post-treatment coil of the air introduced into the rooms.
Note: Read only parameter.
5.9.3 SAE Parameter
Page for displaying the value detected by the SAE probe for reading the outdoor air temperature.
Note: read only parameter
5.9.4 SAM Parameter
Page for displaying the value detected by the SAM probe for reading the temperature of the air introduced into the room.
