24
NIGHT OPERATION
When the unit stop is timed, the microprocessor starts the night operation mode.
However, this program works regardless of the time of the day. It is normally used when starting sleeping but it is not requi-
red on all the night through.
COOLING OR DEHUMIDIFICATION MODE
When the fan coil is on cooling or on dehumidification mode,
it works as follows:
– one hour after the timed start the temperature is increased by
1 °C;
– the new temperature is kept until the timed stop;
– the fan coil stops at the timed hour.
HEATING MODE (heat pump models only)
When the fan coil is on heating mode, it works as follows:
– one hour after the timed start, the temperature is lowered by
3 °C;
– the new temperature is kept until the timed stop;
– the fan coil stops at the timed hour.
NOTE:
Automatic modification of the temperature by the
microprocessor prevents excessive cold during operation in COOLING or DEHUMIDIFICATION mode, and excessi-
ve heat during HEATING mode. The modified temperature (1 °C higher on cooling and 3 °C lower on heating
modes) cannot be changed.
1 h
1 °C
Stop
Funzionamento temporizzato
Inizio funzionamento temporizzato
1 h
3 °C
Stop
Funzionamento temporizzato
Inizio funzionamento temporizzato
GB
