AERMEC ANK, Руководство по установке

Страница: 9 / 14

9
How to modify a parameter in the installer menu:
To enter the INSTALLER menu, press the key shown in (Fig.A).Once the
key has been pressed the password must be insertedfor access to the
various menus. To access the user menu the
password is 030
. To
modify the value of the password use thearrow keys. Once the correct
password has been inserted, press the key shown in (Fig.A). The dis ‐
play shows the index of the INSTALLER parameter and a string of three
characters that identify it. The string remains displayed for one sec ‐
ond, after which it is replaced by the value relative to the parameter
itself. To pass to the next parameter, use the arrow keys (Fig.B). To
modify a parameter, just select it, press the key shown in (Fig.A), mod ‐
ify the value using the arrow keys shown in (Fig.B). To confirm the
modification press the key shown in (Fig.A) again.
7. LIST OF CONTROLS FOR THE GUIDED
PROCEDURE
How to modify a parameter in the user menu:
To enter the
USER menu
press the key shown in (Fig.A). Once the key
has been pressed the password must be inserted for access to the various
menus. To access the user menu the password is
000
(which is the de ‐
fault displayed); to modify the value of the password use the arrow keys.
Once the correct password has been inserted, press the key shown in
(Fig.A). The display shows the index of the
USER
parameter and a string
of three characters that identify it. The string remains displayed for one
second, after which it is replaced by the value relative to the parameter
itself. To pass to the next parameter, use the arrow keys (Fig.B). To mod ‐
ify a parameter, just select it, press the key shown in (Fig.A), modify the
value using the arrow keys shown in (Fig.B). To confirm the modification
press the key shown in (Fig.A) again.
.