background image

aerl 

COMMS MANUAL 

 

COOLMAX SR 

Australian Energy Research Laboratories, Pty.Ltd 

AER07.004 – Version G2 v9 

13

th

 January 2016 

 

 

 

3 of 21 

1

 

PRODUCT WARRANTY 

1. 

AERL  warrants  that  the  Product  will  be  free  from  manufacturing  defects  for  a  period  of  24 
months from the date of dispatch of the products by AERL to the customer. 

2. 

The  Products  technical  specifications  are  contained  within  the  Product  Datasheet.  The 
Product will conform to the technical specifications contained in the Product Datasheet at the 
time of dispatch of the Products to the Customer. If the technical specifications as contained 
in  the  Product  Datasheet  are  not  met, AERL  will  repair,  replace  the  Product,  or  refund  the 
amount  paid  by  the  Customer  in  relation  to  the  Product  at  the  Customers  option. AERL  is 
under  no  obligation  to  provide  assistance  or  advice  to  the  Customer  in  relation  to  the 
technical specifications. 

3. 

The  Products  must  be  installed  in  strict  accordance  with  the  Installation  Recommendations 
listed in this Manual. 

4. 

In no event will AERL be liable for: 

a) 

any loss or damage which the Customer suffers arising from, or caused or contributed to by, 
the Customer's negligence or the negligence of the Customer's agents or servants; and 

b) 

special, indirect or consequential loss or damage as a result of a breach by the Customer of 
these Standard Terms including, without limitation, loss of profits or revenue, personal injury, 
death,  property  damage  and  the  costs  of  any  substitute  Products  which  the  Customer 
obtains. 

5. 

The  Product  is  not  covered  for  damage  occurring  due  to  water,  including  but  not  limited  to 
condensation, moisture damage and other forms of precipitation. 

6. 

The  Product  is  not  covered  for  damage  occurring  due  to  the  Product  being  incorrectly 
installed  or  installed  in  a  manner  not  in  accordance  with  the  Installation  Recommendations 
listed in the Product Manual. 

7. 

The Product is not covered for damage occurring due to failure on the part of the customer to 
operate  the  product  in  accordance  with  the  technical  specifications  as  listed  in  the  Product 
Datasheet. 

8. 

The Product is not covered for damage occurring due to lightning. 

9. 

The Product is not covered for situations where it is used in a manner not specifically outlined 
in the Product Manual. 

10.     If any provision in this document is invalid or unenforceable this document will remain otherwise 

in full force apart from such provision, which will be deemed deleted

 

 

Disclaimer: 

 

Australian Energy Research Laboratories Pty Ltd, its affiliates, agents, and employees, and all persons acting on its 
or their behalf (collectively, “AERL”):  
a) Disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any 
other disclosure relating to any product  
b) Assumes no responsibility or liability for loss or damage whether direct, indirect, consequential or inci-dental, 
which might arise out of use of such information. The use of any such information will be entirely at the user's risk.  
c) Reserves the right to change any AERL product, product specifications and data without notice to im-prove 
reliability, function or design or otherwise. 
 

Notice of Copyright 

 

AERL COOMAX SR MPPT Solar Charge Controller User Manual Copyright 

2016 all rights reserved. AERL 

reserves the right to revise this document and to periodically make changes to the content.

 

 

 

 

   

 

Содержание COOLMAX SR























Отзывы: