AerialBox T1050PVR, Руководство пользователя

Страница: 13 / 36

Main Menu - Installation -
System Setting
Note: To adjust a setting use the right arrow on your remote. To select a setting use the OK button
.
HD Resolution
– This is where you set the HDMI output resolution depending on what your TV can handle. Most
newer TVs have upscalers and so therefore you can sometimes get a better picture by lowering the output
resolution in this menu, It does however depend on the quality and type of upscaler your TV has. If you want the
very best picture possible, then you will need to experiment with these resolutions.
The Native option will mean the unit will output the broadcasted resolutions.
HDMI Output Mode – Here you have the options of Compressed or Uncompressed. This option may be changed
to suit your HDMI receiver or surround sound unit depending on what it requires. Default is Uncompressed.
HDMI Control - Or HDMI CEC. This is used to control other CEC capable devices, for example when you turn your
receiver on your TV will turn on automatically. If you find your TV turning on when you don’t want it, make sure
this setting is set to off.
HDCP or High-bandwidth Digital Content Protection. This can be turned on/off
Aspect Ratio
– This is to set the output picture shape depending on your TV. If you have a modern LCD or Plasma
TV or a wide screen, then you most likely need to set it to 16:9. If you have an older square TV then 4:3 Panscan will
most likely suit.
LCN
- This stands for Logical Channel Numbering. It is best to be set to On.
LPM in stand-by
– This option turns Low Power mode on/off
4 AM Standby S/W upgrade - When this option is set to ON, your unit will start up at 4am each morning and look
for a new software upgrade.
Hearing Impaired
– This option is to turn subtitles on/off.
Antenna power -
When this option is set to ON your unit will output 5V dc on the aerial socket, this voltage can
be used to power an inline amplifier to boost the signal levels.
Digital Text Cookies -
This is cookies like a web browser. This option will allow them to be saved.
13