Aerial AD 420, Инструкция по эксплуатации

Страница: 28 / 37

MAINTENANCE AND SERVICE
Page 25 of 32
Proceed as follows:
1. Check integrated hygrostat for functioning.
2. Switch air dehumidifier off.
3. Pull the power plug.
4. Remove filter holder.
5. Clean the air filter, if necessary replace it.
6. Remove front and top panels.
7. Clean air dehumidifier carefully with compressed air (wear protective goggles!)
Make sure to clean all components (compressor, heat exchanger etc.).
8. Remount front and top panels.
9. Visual inspection: collecting tank, drain pipe and connected hose, if any
10. Clean casing on the outside with a moist cloth (do not use any aggressive
detergent!)
11. Insert new or cleaned filter. Use only original filters to guarantee proper
functioning of the air dehumidifier.
12. Insert filter holder.
13. Connect power cable.
14. Switch air dehumidifier on.
The air dehumidifier is ready for operation and can be switched on via the
On / Off switch, if required.
Spare parts and customer service
If you have any question concerning the air dehumidifier, or if you need spare
parts, please contact your authorised dealer or the customer service.