AEREX 0040.0420, Инструкция по эксплуатации и обслуживанию, Страница: 28 / 56

28 www.aerex.de
Reco-Boxx ZXR / ZXA / Flat – Operation and maintenance instructions [03/ 2021]
Stop fan when pressure alarm
Possibility to stop the fans automatically in case of a pres-
sure alarm.
Setting Settings range Factory setting
Stop fans No
Yes No
Start torque
Possibility to change the fans’s starting torque.
Setting Settings range Factory setting
Start Torque 0...100 % 2 %
Deactivate softstop
With this function, the “OFF” function is deactivated.
Setting Settings range Factory setting
Softstop Yes
No No
Temperature
In this menu advanced temperature control parameters
can be modified.
Supply air involves keeping a constant supply air temper-
ature without consideration to the load in the premises.
Extract air involves keeping a constant temperature in the
extract air duct (premises), by modulating the supply air
temperature.
The reaction speed of capacity control signal can be mod-
ified. A higher Setting will result in a smoother control; a
lower Setting will result in a faster reaction speed. but also
greater risc of oscillations.
Setting Settings range Factory setting
Supply or Extract
temperature
control? Supply
Extract Supply
Reaction speed 1...10 1
Supply air, min. 0...20 °C 15,0 °C
Supply air, max. 16...50 °C 28,0 °C
Stop fan if T°Supply
<5°C No
Yes No