Aereco VB21116, Руководство по установке и обслуживанию

Страница: 3 / 28

3/28
TF6751_D Aereco S.A.
1. INTRODUCTION
1.1. Warnings
BEFORE INSTALLING THE APPLIANCE, PLEASE READ THESE INSTRUCTIONS CAREFULLY.
▪
The manufacturer cannot be held liable for damage caused by installation in violation of good practice
and/or contrary to the directions given in the installation manual.
▪ This manual describes how the fan must be installed and used.
▪
The whole system must be installed by an approved professional and in compliance with the standards
in force.
▪
Do not use this appliance other than for its intended purpose.
▪ After unpacking, make sure that it is not damaged. Any functional defect must be reported to your
dealer.
▪
Wearing suitable gloves while handling the product is strongly recommended (some of the metal parts
have sharp edges).
Reminders of elementary safety rules:
The use of an electrical appliance requires observance of the following elementary rules:
▪ Do not touch the appliance, even if it is earthed, if your body is moist or wet (hands, feet, etc.);
▪
This system is not designed to be installed or used by persons whose intellectual and/or mental
faculties are impaired, or who lack experience and knowledge (including children), unless they have been
trained and are supervised by a person responsible for their safety during installation. To eliminate any risk
of an accident, keep them away from the appliance;
▪ The electrical installation and connection work must be done by a qualified technician, in accordance
with the manufacturer's recommendations and in a manner consistent with the characteristics of the
product;
▪ Before doing any work on the appliance, unplug it or otherwise disconnect it from its power supply and
make sure that the power cannot be restored accidentally while the work is being done;
▪
Any change or replacement of a wire must be done by a qualified technician;
▪
Young children must be kept far away from the appliance in order to ensure that they do not play with
it.
The following instructions must also be observed:
▪ The number of fans and their arrangement must be studied so as to ensure the proper operation of the
system.
▪
In general, barring special cases, all ducts of a given stack of housing units must be equipped with one
or more fans.