23/28
TF6751_D
Aereco S.A.
5.
STARTING UP/OPERATION
▪
Before commissioning, check that the fan is securely attached to its stack and
that no object has been left inside the duct or might interfere with the turbine.
▪
Do not insert anything through the fan.
▪
Never start up if the control unit is open.
▪
Check that a bonding jumper is in fact connected to the carcass.
5.1.
ST mode
1) Power up the appliance. It then starts.
The motor technology used may lead to starting errors.
If this happens, the appliance fails to start and
begins vibrating slightly
. Do not touch anything;
the appliance will itself initiate a starting cycle, until it
starts.
To access the fan speed control potentiometer in ST mode:
Unscrew the reductor, adjust the potentiometer and screw in the reductor sufficiently to keep the reductor waterproof.
Adaptator
Speed control
potentiometer
