Aereco DXA 230 PREMIUM, Инструкция по установке и обслуживанию, Страница: 6 / 36

6 / 36
TF6400_A Aereco S.A.
Dimensions of DXA Unit (mm)
2.2. CONSTRUCTION / DIMENSIONS
DXA Unit 230 m
3
/h – Heat recovery unit
ø160 ø160 88
101
166
164
210
248 151 155
1189
240
R2,50
80
1184
130
545
40
482
545
138 118
151
R80
248
155
554
R80
101
See the characteristics of the DXA Unit system on page 30
·Envelope in EPP, covered by a white creamy metal sheet.
·2 low energy consumption fans driven by EC (electronic commutation) motors (supply air and
exhaust air).
·2 F7 anti pollen filters for the fresh air.
·G4 filter for the exhaust to protect fans and the exchanger.
·Continously checking of filter clogging, and warning for filter change.
·High efficiency heat exchanger with plastic plates, washable.
·Intelligent electronic control unit of the heat recovery, with integrated or remoted control interface.
·Integrated bypass and free-cooling automatically controlled.
·Built-in siphon or condensate pump to evacuate the condensate.
2.3. DXA ASSEMBLING
When delivered, the DXA Unit is furnished with 4 lipseals spigots.
Before removing the 4 plastic caps, pull out carefully the staples
with a screwdriver to not dammage the EPP material. No need to
seal the spigots once they are pushed in the inlets and outlets of
the DXA, the lipseals make it already airtight.
Assembling of the DXA spigots