Aereco DXA 230 PREMIUM, Инструкция по установке и обслуживанию, Страница: 2 / 36

2 / 36
TF6400_A Aereco S.A.
1. Introduction 3
1.1. Warnings 3
1.2. Pictograms 3
2. Description 4
2.1. General information 4
2.2. Construction / Dimensions 6
2.3. DXA Assembling 6
3. Installation 7
3.1. Location of the installation 7
3.2. DXA Unit 7
3.2.1. Location 7
3.2.2. Accessibility 8
3.2.3. Fixing of the DXA Unit 8
3.2.4. Duct connections to the DXA Unit 10
3.2.5. Evacuation of condensates 11
3.3. Exhaust compensation valve (MCP 125) 12
3.4. Defrosting 13
3.5. Sensors 14
3.5.1. Presence sensors (DX S-PRE) 14
3.5.2. C0
2
sensors (DX S-CO2) 14
3.6. DXA user’s interface 15
3.7. Special care for the ductwork 16
3.8. Fire protection 16
4. Electrical connections 17
4.1. Electrical connection on the DXA Unit 18
4.2. Electrical connection of the defrosting 19
4.3. Electrical connection of the condensate pump (optional) 19
5. Starting and settings of the DXA 20
6. Maintenance 20
6.1. Regular maintenance of the installation 20
6.2. Fuse 20
6.3. Replacement of supply cable 20
6.4. Power supply and motor material protections 21
6.5. Filters 21
7. Troubleshooting 22
8. Acceptance of works 23
8.1. Visual inspection 23
8.2. Measurements 23
9. Specific recommendations for airtightness and insulation of the installation 24
9.1. Insulation of the installation 25
9.2. Airtightness of the installation 25
10. Supply and exhaust units 27
10.1. Supply units 28
10.2. Exhaust units 28
10.3. Fresh air inlet and exhaust air outlet 29
11. Environmental concerns 29
12. Warranty 29
13. Conformity and standard 29
14. Characteristics 30