- 12 -
3. Indoor temperature low alarm
4. Outdoor humidity low alarm
5. Outdoor temperature low alarm
6. Wind chill low alarm
7. Dew point low alarm
8. Pressure low alarm
For each alarm press the
+
key to change or scroll the value upward, press the
MIN/MAX
key to
change or scroll the alarm value downward. Hold the
+
key or
MIN/MAX
key for 3 seconds to
change the number faster. Press the
ALARM
key to turn the
alarm on
or
off
(if the alarm is
enabled the speaker icon on the LCD will be turned on indicating the alarm function has been
enabled). Press the
SET
key to toggle through each alarm mode until it returns to Normal Mode.
Press the
HISTORY
key or no keys for 30 seconds at any time and the alarm mode will return to
Normal Mode.
Canceling the Temperature Alarm While Sounding
When a set weather alarm condition has been triggered that particular alarm will sound for 120 seconds and
flash until the weather condition does not meet the alarm level. Press any key to mute the alarm. When the
weather alarm condition is activated again within 10 minutes the alarm will not sound but will continue to flash
until the weather conditions have become more stable. This feature is useful to avoid repeated triggering for
the same alarm value.
Note:
The alarm will reactivate automatically once the value has fallen below the set value.
The outdoor weather alarm
When a set outdoor weather alarm has been triggered, it will flash on the LCD display and the general
outdoor alarm icon and high/low alarm icon will flash accordingly. For example, in the outdoor temperature
display mode, when the dew point high alarm is triggered the
DEW POINT
icon will flash along with the
general outdoor alarm icon and high alarm icon, telling the user that the current alarm source is from the dew
point.
Temperature display mode
The dew point high alarm was triggered
Digital flashing
digital flashing
5.5 Min/Max Mode
While in Normal Mode, press the
MIN/MAX
key to enter the Maximum Mode.
Press the
MIN/MAX
key again to enter the Minimum Mode.
Press the
MIN/MAX
key again to return to Normal Mode.
In the Maximum Mode, press the
+
key to display the following maximum values together with the
time and date stamp of when these values were recorded. Pressing the
SET
key will reset the
value to the current reading together with the current time and date.
