- 10 -
HISTORY
key, or waiting for the 30-second time-out to take effect.
5.1 Quick Display Mode
While in Normal Mode, press the
SET
key to enter the Quick Display Mode:
1. Outdoor Temperature / Wind Chill / Dew Point (press the
+
key or
MIN/MAX
key to shift the display
between outdoor temperature, wind chill and dew point).
2. Absolute Pressure / Relative Pressure (press the
+
key or
MIN/MAX
key to shift the display between the
absolute pressure and relative pressure).
3. Wind Speed / Gust Speed (press the
+
key or
MIN/MAX
key to shift the display between the wind speed
and gust speed).
4. 1 Hour / 24 Hour / Week / Month / Total Rainfall periods (press the
+
key or
MIN/MAX
key to shift the
display between the selectable rainfall periods). Press the
SET
key for two seconds while displaying
Total Rainfall will reset rainfall to zero and the recording time to the current time.
Press the
SET
key to accept the change and advance to the next display mode. Continue to press the
SET
key to toggle through the display modes until returning to Normal Mode.
5.2 Setting Mode
Press the
SET
key for 3 seconds while in Normal Mode to enter the Setting Mode
Press the
SET
key to select the following settings in sequence:
1. Time zone setting
2. 12/24 hour format
3. Manual time setting (hours/minutes)
4. Calendar setting (year /month/ date, the weekday will be calculated)
5. Temperature display unit in degrees Celsius or Fahrenheit
6. Air pressure display units in hPa or inHg
7. Relative pressure setting from 919.0hPa
– 1080.0hPa (default 1013.2hPa)
8. Pressure threshold setting (default 2hPa)
9. Storm threshold setting (default 4hPa)
10. Wind speed and gust display units in km/h, mph, m/s, knots or bft
11. Rainfall display units in mm or inches
In the Setting Mode, press the
+
key or
MIN/MAX
key to select the units or scroll the value.
Holding the
+
key or
MIN/MAX
key for 3 seconds will increase/decrease the digits faster.
Press the
HISTORY
key or no keys for 10 seconds and the Setting Mode will return to Normal
Mode.
Note:
Please set the units first before changing the corresponding
unit’s value. When changing between
units the previous set value will be changed according to the new units. This may cause resolution loss due
to the internal calculation algorithm.
Note:
The radio controlled clock (RCC) works off the German DCF77 time signal received across large parts
of Europe and the UK so set your time zone as follows:
