Aercus WH41, Инструкция по эксплуатации

Страница: 5 / 12

Aercus Instruments™ - WH41 5 | P a g e
4. Setup Guide
1. Remove the battery door on the base of the air
quality sensor.
2. Insert two rechargeable AA batteries.
3. After inserting the batteries, the remote sensor
(red) LED indicator will illuminate for 4 seconds,
and then flash once every 10 minutes thereafter.
Each time it flashes, the sensor is transmitting data.
4. Close the battery compartment cover.
5. Connect the USB cable to a standard USB power
adapter (not supplied) and charge battery until the
blue LED is turned off, indicating batteries are fully
charged.
6. Without the help of sufficient solar radiation, a
fully charged pair of batteries can last for about 20
days/500 hours. The battery status monitor on
display will reflect the battery power status. When
battery is exhausted, please charge the sensor
again.
5. Connecting to your WeatherMaster
The PM2.5 sensor does not have its own screen and must
be used with a compatible device such as a Weather Master
console or other compatible device.
If you have never connected a WH41 to your
WeatherMaster HP2550, it should automatically be seen by