Aercus Instruments™
- WeatherSpy
13 |
P a g e
The outdoor sensor then sends the RCC signal to display
console, Once the radio controlled time is received, RCC
reception icon will show on the display console.
If the signal reception linking is not successful within five
minutes, the signal search will stop and will
automatically resume every six hours until the signal is
successfully captured. The regular data link will resume
once the RCC reception routine is finished. In some
locations, RCC signal may take a couple of days to be
acquired.
3.5
Remote Sensor Installation
Before mount the units, ensuring that the receiver can
still pick up the signal from transmitters. Please mount
the sensors in a sheltered position, out of direct
sunlight. Direct sunlight and radiant heat sources will
result in inaccurate temperature readings. Although the
sensors are water resistant, it is best to mount in a
covered area, such as under the eaves or an awning.
Use a screw or nail to affix the remote sensor to the wall,
as shown in Figure 6 or hang the remote sensor up on
string, as shown in Figure 7.
