Aercus Instruments™
- WeatherSpy
10 |
P a g e
3.
BEFORE
inserting the batteries, locate the
switches on the inside cover of the lid of the
transmitter (see figure 4).
4.
Channel Number:
the WeatherSpy supports up to
three sensors. Choose a channel number for each
transmitter by, sliding the button.
5.
Temperature units of measure:
To change the
sensor display units of measure between °C and °F,
press the round button marked C/F.
6.
Insert two AA batteries
7.
Wait for a few seconds until temperature and
humidity displayed on the LCD screen of sensors.
8.
Verify the correct channel number (CH) and
temperature units of measure are on the display,
as shown in Figure 5.
