Aercus Instruments™
- WeatherMaster
19 |
P a g e
4.2.7
Reset Button and Transmitter LED
In the event the sensor array is not transmitting, reset the sensor array.
Using a skewer or open paperclip, press and hold the
Reset Button
(see
Figure 0) to affect a reset. The LED turns on while the Reset button is
depressed, and it can now be released. The LED should then return to
flashing approximately once every 16 seconds.
Figure 10: Reset button and Transmitter LED location
4.3
Indoor Sensor Set Up
Note:
To avoid permanent damage, please take note of the battery polarity
before inserting the batteries.
Remove the battery door on the back of the sensor. Insert two AA batteries
(See Figure 11)
