11
Installation and Assembly
Installation of individual modules
To assemble individual modules (dividing joint) proceed as follows:
• Do not forget to attach the sealing seal between the two modules while assembling the modules.
Once you have connected the modules, make sure you stick the two modules with silicone.
DAMAGE TO THE UNIT!
Do not attach tensioning belts/hoisting devices to heat exchanger connections, condensate drains
and door handles or use these to pull or push the equipment!
• Position the unit parts as close to one another as possible prior to assembly. Only use the unit
base frame to pull the individual components together. Units that do not have a base frame must
be pulled together with tensioning belts.
These must be positioned round the profiles in the base or roof area.
Figure 6-3: Installing individual modules
Figure 6-4: Unit with base frame
Figure 6-5: Unit without base frame
max. 80 mm
