BC 2000 DIGITAL
Audio Routing, Mixing and Processing System for Program Production Centres
.
ARENA DM CONTROL SURFACE
FUNCTIONAL DESCRIPTION
31
3.2.1.3.3. Reverb.
Signals are time processed in the reverb function, with 4 different effects available:
“Plate“, “Hall“, “Vocal“ and “Room“.
To access this function, just select the “Reverb“ option by means of the encoder
associated to the “SCROLL“ label (3.2.1.3. section), and then press the encoder (or the
pushbutton below the “ENTER” label).
Once the “Reverb“ option has been selected the following screen will appear:
On the top of the screen all the effects available will appear (Type: Hall, Vocal, Room,
or Plate). Right under “Type“ and to the left are different configuration labels, which
were assigned on the configuration software (the labels are used for storing a certain
effect configuration). Right under that we find “Signal“, which is the audio signal to
which the effect is being applied .
On the right, there are controls for “DECAY TIME“ (in seconds), “HF DAMPING” (High
Frequency Damping in %), and the relative “LEVEL” of the effect in relation to the signal
(%)
On the lower part of screen, by means of P1 through P5 pushbuttons (22) several task
can be accomplished: scrolling through the different processing effects (“CHANGE
TYPE“), restoring the effect to initial values (“RESTORE“) or to exit the screen (“EXIT“).
