29/10/2019
Aeotec Wallmote user guide : Aeotec Group
https://aeotec.freshdesk.com/support/solutions/articles/6000176572-wallmote-user-guide-
7/9
(https://aeotec.freshdesk.com/solution/articles/6000162165-using-wallmote-quad-with-vera-ui7)
), in order to do so, please
refer to your gateways manual on setting group association. This will allow the WallMote to directly communicate
ON/OFF or Dimming commands to your devices without going through your gateway.
Every control button also can send the control commands to control the devices in the other association groups, see
the table below:
Dimmer control via sliding the button area.
The WallMote also supports sliding control, when the parameter 4 [1 byte] has been set to 3, you can slide up or down
on the button area to control a dimmer device by sliding up or down. Swiping up once will dim up a dimmer device by a
certain percentage, while swiping down once will dim down a dimmer device by a certain percentage.
This application is only suitable for Group Association control, it does not work with scene controls.
Your WallMote battery.
