Aeon Labs Aeotec Z-Stick Gen5, Руководство пользователя

Страница: 5 / 17

Affix your Sensor plates to a surface.
The Mounting plates can be affixed using screws or double-
sided tape.
If you are using screws, attach both mounting plates to the
respective surface using the two 20mm screws provided.
If you are using double-sided tape, wipe the two surfaces clean
of any oil or dust with a damp towel. When the surface has
completely dried, peel one side of the tape back and attach it
to the corresponding section on the rear side of the mounting
plates.