
Installation and Operation Manual
AENO AP3 air purifier
© ASBISc Enterprises PLC. All rights reserved
Document version: 1.0.1, aeno.com
Page 29 of 39
WARNING! Do not immerse the device or filter in water or expose it to a
stream of water.
Figure 10
– Prohibition of contact with water
Allow the filter to completely dry for at least 24 hours in a dry, sunny place before
reinstalling it. Do not use a clothes dryer, hair dryer, oven, etc.
After drying, put the filter back in place by holding
it by the fabric loops. Place the HEPA filter with the
HEPA surface facing outward and the carbon
surface facing inward. Make sure that the fabric
loops remain freely accessible for later removal of
the filter.
Install the bottom cover on the device by turning
it clockwise.