
Installation and Operation Manual
AENO AP3 air purifier
Document version: 1.0.1, aeno.com
© ASBISc Enterprises PLC. All rights reserved
Page 28 of 39
To clean the filter, turn it over and place it on a
horizontal surface.
Remove the bottom cover of the device by
turning the handle counterclockwise.
Remove the filter from the purifier casing by
gently pulling on the fabric loops.
Place the filter on a horizontal surface (such as a
table), placing it on paper or other backing
material so as not to damage the table surface.
To remove dust or large pieces of dirt from the
filter surface, use a soft brush or damp cloth with
a neutral cleaning agent.
After cleaning one surface, remove debris from
the liner, turn the filter over, and clean the other surface.
Do not put pressure on the filter surfaces, as they are easy to ruin. Avoid intense
friction. Be especially careful when cleaning the surface of the charcoal filter.