AENO AAP0002S, Руководство пользователя

Страница: 8 / 162

6 aeno.com/documents
EN The AENO AP2S Air Purifier is a household appliance designed to clean
indoor air from allergens, pollen, fungal spores, dust particles, smoke, animal
hair, and unpleasant odors.
Specifications
Input voltage: 100
– 240 V (AC), 50/60 Hz. Rated power: 40 W. Air flow rate:
420 m 3 /h. Coverage: 50 m 2 . Indoor air purification time: 0,5 hours. Noise level: in
the night mode 25 dB (at a distance of 1 m). Dimensions (L × W × H): 590 mm ×
100 mm × 395 mm. Built-in UV LED. Wi-Fi module. RF remote control. Remote
control range: 10.5 m. Emission power: +20 dBm/100 mW.
Package Contents
AENO AP2S Air purifier , HEPA filter, remote control, mounting screw (3 pcs.),
power cord, support, wall bracket, plugs (2 pcs.), plastic inserts (4 pcs.), self-
tapping screws (4 pcs.), quick start guide, warranty card.
Limitations and Warnings
ATTENTION! The device is equipped with a built-in UV LED. It is not allowed to
disassemble the device and turn it on when disassembled, because it may be
very harmful for eyes.
Make sure the purifier is unplugged before removing the front panel. Do not
immerse the purifier in water or any other liquid. Do not use aggressive and
flammable chlorine- or alcohol-containing agents to clean the purifier. Water
is not allowed to enter the body of the purifier. Use the device as described in
this Quick Start Guide and the complete User Manual only. Failure to follow the
instructions may result in fire and other hazardous situations, as well as injuries.
Do not use the device if it is damaged or cracked. Do not install the device
outdoors or near sources of water, including humidifiers. Do not expose the
device to direct sunlight, moisture or vibration. Do not drop, throw,
disassemble the device, or try to repair it on your own. Do not lay the power
cable near radiators, stoves, or heaters. Do not use cleaning agents or